進口滑片泵美國滑片泵
進口滑片泵特性：
*的開放式轉子和可自動調節長度的滑片設計,可保證始終如一的流量
桶式密封函及滾珠式軸承保證了zuijia的泵送性能
泵的排水塞可自動排泄雜物,簡化了清潔和沖洗的維護
泵在原地即可打開端蓋更換葉片,方便維護保養，可選防腐蝕性的鍍鎳或覆特氟龍材質的彈性體和316不銹鋼材質的機械密封，可選配的材質:覆特氟龍材質的彈性體,密封面為青銅材質的機械密封,青銅材質的滑片或液壓驅動式.
進口滑片泵工作原理：
滑片泵采用一個有多片滑片的轉子, 在離心力的作用下, 流體穿過葉片由吸入口進入泵腔內。轉子的持續運轉, 泵腔內的流體也隨之運動, 在各種機械力和液壓力的作用下, 流體被送至出口。每個葉片為流體提供正位移機械和液壓推力。
進口滑片泵技術參數：
流量：10-200m3/h
工作壓差：0.2-1MPa
zui高工作壓力：2.5MPa
吸入極限真空度：0.06-0.09MPa
自吸性能：＜60s/5m
效率：70-85%
轉速：300-970r/min
功率：2.2-75kw
輸送介質溫度：-40～80℃
適用介質粘度值：1～1500cst
進口滑片泵優點：
自吸滑片泵，采用帶葉片的轉子驅動液體。材質上采用球墨鑄鐵配合自潤滑的葉片。因為其優良的性能，可以傳輸粘性的和揮發性的液體，相比同等的泵功率更低。 在低轉速大流量的傳輸中更具優勢。
快速、低噪音的*使用；
葉片式結構使其性能穩定、*使用。
滑片泵具有以上優點，而且自吸能力強，壽命長，體積小，效率高。在輸送汽油、柴油或者類似介質的情況下，滑片泵具有非常大的優勢，是自吸式離心油泵和銅輪齒輪泵的替代品。
進口滑片泵美國德國泰樂TYLER售后服務：
用戶*，信譽*，優質、完善的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷完善科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。
Sliding vane pump
Inlet vane pump characteristics:
Unique open rotor and automatic adjustment of the length of the slider design, to ensure consistent flow
The bucket sealing and ball bearing ensure the best pumping performance
The drainage pump can be automatically discharge debris, simplifies the maintenance of cleaning and flushing
Pump in place to open end cover replacement blades, easy maintenance, elastic optional corrosion of nickel plated or coated Teflon material and 316 stainless steel mechanical seal, optional material: Teflon coated elastomer material, sealing surface for the bronze material mechanical seal, slide or hydraulic driven bronze material.
Imported sliding vane pump working principle:
The sliding vane pump adopts a rotor with a plurality of sliding blades, and under the action of centrifugal force. The continuous operation of the rotor, the pump cavity of the fluid is also moving, in a variety of mechanical and hydraulic pressure, the fluid was sent to the exit. Each blade provides positive displacement mechanical and hydraulic thrust.
Technical parameters of imported sliding vane pump:
Flow: 10-200m3/h
Working pressure: 0.2-1MPa
Maximum working pressure: 2.5MPa
Suction limit vacuum: 0.06-0.09MPa
Self-priming performance: 60s/5m
Efficiency: 70-85%
Speed: 300-970r/min
Power: 2.2-75kw
Medium temperature: -40 ~ 80 C
Applicable medium viscosity value: 1 ~ 1500cSt
Imported sliding vane pump:
Self suction sliding vane pump, driven by rotor with blades. The material is made of spheroidal graphite cast iron with self lubricating blades. Because of its excellent performance, it can transmit viscous and volatile liquids, which is lower than the same pump power. In the low speed and large flow of transmission more advantages.
Long term use of fast, low noise;
The blade type structure makes its performance stable and no trouble to use.
The sliding vane pump has the advantages of strong self-priming capacity, long service life, small volume and high efficiency. In the delivery of gasoline, diesel or similar medium under the condition of sliding vane pump has a very big advantage, is self-priming centrifugal pump and the copper wheel gear pump replacement.
The United States Germany imported vane pump TYLER Taylor customer service service:
Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.
